Installing compressor/condenser line
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Replace O-rings on the lines.
- Installation is performed in reverse order.
Observe specified tightening torques:
Air-conditioning line to condenser: Tightening torque 9 Nm (6.5 ft lb.)
Air-conditioning line to air-conditioning compressor: Tightening torque 20 Nm (15 ft lb.)
Air-conditioning line to connection point in front left wheel housing: Tightening torque 12 Nm (9 ft lb.)