Teaching servo motor
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
The servo motors only need to be taught if a servo motor is replaced.
- PIWIS Tester 3 9900
must be connected. Then teach the servo motors.
- 1.1. Select vehicle.
- 1.2. Select "Air conditioning" control unit.
- 1.3. Select "Maintenance/repairs".
- 1.4. Select "Automatic addressing of LIN servo motors" and press [F12] to continue.
- 1.5. Start function by pressing [F8].
- 1.6. Select "Teach flap limit stops of LIN servo motors" and press [F12] to continue.
- 1.7. Start function by pressing [F8].
- 1.8. PIWIS Tester 3 9900 must then be shut down and disconnected.