LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (10 - Engine - Crankcase, Suspension) >> WM 100119 Removing and installing engine >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear cardan shaft. → 393519 REMOVING AND INSTALLING REAR CARDAN SHAFT
  2. Install front wheel housing liners. → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
  3. Install cover for front underbody. → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
  4. Install front wheels. → 440519 REMOVING AND INSTALLING WHEEL
  5. Install the front strut. → 408619 REMOVING AND INSTALLING FRONT STRUT
  6. Install filler neck on windscreen-washer reservoir. → 926019 REMOVING AND INSTALLING WINDSCREEN-WASHER RESERVOIR
  7. Install cowl panel cover. → 508719 REMOVING AND INSTALLING COWL PANEL COVER
  8. Install air cleaner housing. → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING
  9. Fill in coolant. → 193817 DRAINING AND FILLING COOLANT
  10. Connect the battery. → 270619 REMOVING AND INSTALLING BATTERY
  11. Fill in refrigerant. → 870317 DRAINING AND FILLING REFRIGERANT
  12. Install engine cover (design cover).
  13. Perform suspension alignment. → 449503 SUSPENSION ALIGNMENT, COMPLETE
scientia non olet · About LEMON Manuals