LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (72 - Seat Frames) >> WM 721919 Removing and installing backrest frame >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The required preliminary work and subsequent work can vary depending on equipment.

The instructions provided in the document are for vehicles with the maximum possible equipment.

  1. On vehicles with heated seats:  Connect electric plug connection for seat heating for backrest and secure wire harness. → 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST - "INSTALLING"
  2. Secure wire harness for side airbag at the underside of the seat. → 696319 REMOVING AND INSTALLING FRONT SIDE AIRBAG - "INSTALLING"
  3. Secure pressure line (red) under the seat. → 723819 REMOVING AND INSTALLING CONTROL VALVE FOR AIR CUSHION - "INSTALLING" 
  4. Install side trim panel for front seat, without storage tray. → 721619 REMOVING AND INSTALLING CONTROL PANEL TRIM - "INSTALLING" .
  5. Install side cover for backrest and engage rear cover for backrest at the underside of the seat. → 722619 REMOVING AND INSTALLING COVER FOR BACKREST - "INSTALLING" 
scientia non olet · About LEMON Manuals