LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 740 (90 - Instruments) >> WM 906419 Removing and installing control unit for auxiliary alarm system PCC/VTS >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Before removing the PCC Vehicle Tracking System control unit, the system must be set to Vehicle Servicing mode  .

Vehicle Servicing mode can only be set by the customer  using Car Connect.

  1. Set PCC/VTS control unit to Vehicle Servicing mode.

Remove rear seat. → 724819 REMOVING AND INSTALLING REAR SEAT - "REMOVING "

scientia non olet · About LEMON Manuals