LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> 90 Instruments -- (95B) MACAN >> WM 906419 Removing And Installing Control Unit For Auxiliary Alarm System PCC/VTS (Except MACAN Sport Edition) >> Preliminary Work

Preliminary Work

NOTE: Before removing the PCC Vehicle Tracking System control unit, the system must be set to Vehicle Servicing mode  .

Vehicle Servicing mode can only be set by the customer  using Car Connect.

  1. Set PCC/VTS control unit to Vehicle Servicing mode.

    2. Remove rear seat. → 724819 REMOVING AND INSTALLING REAR SEAT - SECTION ON "REMOVING"

scientia non olet · About LEMON Manuals