Installing Brake Booster

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Carefully fit the brake booster into the vehicle.
Fit the fastening nuts -1- for the brake booster under the dashboard.
> 4X00IN TIGHTENING TORQUES FOR BRAKE MECHANICS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fitting brake booster
Fit the brake booster push rod in the brake pedal.
1. 3.1 Press the brake pedal forward until the ball joint engages in the mounting point.
  > 460519 Removing and installing brake pedal - section on "INSTALLING "
Carefully fit the vacuum line -1- into the brake booster -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vacuum line on brake booster