LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 420119 Removing And Installing Rear Axle >> Subsequent Work For Rear Axle

Subsequent Work For Rear Axle

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit rear wheels.

    > 440519 Removing and installing wheel - section on "REMOVING "

  2. Install the exhaust system.

    > 260119 Removing and installing exhaust system - section on "INSTALLING "

  3. Bleed the PDCC system.

    > 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)

  4. Perform suspension alignment.

    > 449503 SUSPENSION ALIGNMENT, COMPLETE

  5. Calibrate steering-angle sensor.

    > 456005 INITIALISING AND CALIBRATING STEERING-ANGLE SENSOR

scientia non olet · About LEMON Manuals