Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Passenger's Side

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

For V8:
Remove torque support.

> 103719 Removing and installing torque support - section on "REMOVING "
Unclip bleeder valve -1- at the coolant reservoir.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping wire harness at right of engine compartment
Unclip plug connections -2, 3- from the holders at the cross panel.