LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (10 - Engine - Crankcase, Suspension (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 103719 Removing And Installing Torque Support >> Removing Torque Support

Removing Torque Support

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the two screws and nuts on the body and valve cover > Installation position of torque support (position of secondary air pump differs in illustration)  .
    G16308282Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installation position of torque support (position of secondary air pump differs in illustration)

    1  Aluminium screw, M10
    2  M10 nut; counter when using tools.
    3  Bracket on valve cover
    4  Bracket on body
    5  Torque support; part identification on the back, must be installed in opposite direction to direction of travel.
  2. Remove torque support.
scientia non olet · About LEMON Manuals