LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 404119 Removing And Installing Front Drive Shaft >> Subsequent Work >> Subsequent Work For Removing And Installing Front Drive Shaft

Subsequent Work For Removing And Installing Front Drive Shaft

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit connecting link.

    > 407819 Removing and installing front connecting link - section on "INSTALLING "

  2. For 19-inch brake system:

    Fit air guide.

    > 407719 Removing and installing anti-roll bar - section on "INSTALLING "

  3. Fit lock nut for the drive shaft.

    > Refer to the appropriate Tightening Torques For Front Axle service information

  4. Fit hub cap.
scientia non olet · About LEMON Manuals