LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The repair procedure is carried out at the same time for both cylinder head covers.

  1. Remove engine cover.

    > 108319 Removing and installing engine cover (design cover) -  "REMOVING "

  2. Remove bar ignition modules.

    > 282020 Removing and installing bar ignition modules -  "REMOVING "

  3. Remove oil separator for cylinders 5 to 8.

    > 105519 Removing and installing oil separator -  "REMOVING "

  4. Disconnect ground strap for cylinders 5 to 8 from the battery.

    > WM 978509 LOOSENING AND SECURING GROUND STRAP FOR BATTERY

    and loosen the B+ transfer point and set the cables aside > Fastening screw on B+ line  .

    G16308681Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening screw on B+ line

  5. Remove the relevant cross panel at the left or right.

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL

scientia non olet · About LEMON Manuals