Subsequent Work
- Install crankcase ventilation line.
- 1.1. 2WD:
Tightening torque Item 2
2WD: Tightening torque Item 3 Initial tightening 4 Nm (3 ftlb.) Final tightening 90°
- 1.2. 4WD: Tightening torque Item 2
- 1.1. 2WD:
Tightening torque Item 2
- Secure secondary-air line at the cylinder head.
- 2.1. Tightening torque Item 4 Tightening torque 10 Nm (7.5 ftlb.)
- Secure coolant vent line on the cylinder head.
- 3.1. Tightening torque Item 2 Tightening torque 10 Nm (7.5 ftlb.)
- Connect electric plug connections.
- Secure fuel connection line on the fuel collection pipe.→ Installing Fuel Distributor Pipe
- Install deflector rail and tensioning rail on the cylinder head. → Installing Guide And Tensioning Rails
- Install timing chain. → Installing Drive Chain For Timing Drive Mechanism
- Install timing-case cover. → Installing Timing-Case Cover
- Install camshafts. → 150520 REMOVING AND INSTALLING CAMSHAFTS
- Install intake-air distributor. → Installing Intake-Air Distributor
- Install upper part of oil pan. → Installing Oil Guide Housing
- Install turbocharger. → Installing Turbocharger
- Install engine and transmission. → Installing Engine