Installing Front Door Window
- Insert the door window glass into the guide -2-
.
Insert the door window glass into the power windows mounting.
- Align the catches for the door window mounting.
- 2.1. Roll the door window up fully.
- 2.2. Align the door window until it is parallel with the B-pillar trim and corner window pane -A- .
- 2.3. Check that the catches are adjusted without tension and re-adjust them if necessary -B- .
- Screw in fastening screw -1- → Tightening torque: 3.5 Nm (2.5 ftlb.)
.
Information
- The door window in the door in question must be closed in order to install the door sub-frame.
- Close the window manually before installing the window regulator motor.
- Install front window regulator motor. → Installing Power Window Motor
- Install door sub-frame. → INSTALLING DOOR SUB-FRAME
- Adjust the front door window (final stop). → 644015 ADJUSTING FRONT DOOR WINDOW