Replace control module
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damage due to corrosion in the plug connections!
- Protect the plug connections from liquids!
The following points are to be observed if the control unit needs to be replaced:
- The appropriate settings must be coded for the control unit (See CODING )!
- The potentiometers must be calibrated in the new control unit (See CALIBRATION )!