LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 619619 Removing And Installing Convertible Top Control Unit (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

After removing and installing the convertible top control unit, the convertible top must be calibrated using PIWIS Tester II 9818  . → WM 610125 CALIBRATING CONVERTIBLE TOP .

  1. Install trim panel for convertible top compartment. → INSTALLING TRIM PANEL FOR CONVERTIBLE TOP COMPARTMENT .
  2. Install rear cover. → INSTALLING REAR COVER .
  3. Move convertible top out of service position. → 6101IN CONVERTIBLE-TOP SERVICE POSITION .
  4. Calibrate convertible top. → WM 610125 CALIBRATING CONVERTIBLE TOP .
scientia non olet · About LEMON Manuals