LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (70 - Linings, Insulation -- 911 CARRERA (991)) >> WM 705319 Removing And Installing Rear Cover (TARGA 4, TARGA 4S, TARGA 4 GTS) >> Installing Rear Cover

Installing Rear Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the fixing clips are not bent or broken.

Replace missing or damaged fixing clips with new ones.

Make sure that all fastening clips have engaged correctly.

Check that they are fitted correctly.

  1. Installation is performed in reverse order to removal.


  1. Fit cover on the right-hand side of the vehicle and press it down and lock it on the left-hand side of the vehicle.
scientia non olet · About LEMON Manuals