Preliminary work

Information 

If occupant classification components (installed for country equipment USA/Canada) must be replaced, the repair kit comprising padding with affixed mat for occupant classification system and occupant classification control unit must  always be replaced as a complete unit  .

The spare parts are contained in a repair kit (comprising padding with affixed mat for occupant classification system  -1- and occupant classification control unit  -2- ), which must always be replaced as a complete unit  .

1. -1-  Padding with affixed mat for occupant classification system
2. -2-  Occupant classification control unit

A mixed installation  , e.g. "old" padding and "new" control unit, is not permitted  .

The padding with affixed mat for occupant classification system and the occupant classification control unit are calibrated together by the manufacturer and must therefore only be replaced as a complete unit.

The occupant classification control unit must not  be coded.

The mat  for the occupant classification system must not  be removed  from the foam part.

1. Remove padding for front seat. → 741019 REMOVING AND INSTALLING PADDING FOR FRONT SEAT - "REMOVING"