LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (74 - Seat UPHOLSTERIES, Cover) >> WM 741319 Removing And Installing Cover For Front Seat (All Models) >> Removing Cover For Front Seat

Removing Cover For Front Seat

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Seat Cover
G09413898Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove padding for front seat. → Removing Padding For Front Seat 

    Information 

    • Only in cars with seat heating! 
      Fig 2: Removing Seat Heating Connector
      G09413899Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release plug connection -Arrow A-  and disconnect it -Arrows B-  .
    Fig 3: Removing Seat Heating Connector Plug Connection
    G09413900Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Loosen staples -a-  together with cover for padding on right and left -arrow-  .
    Fig 4: Loosening Paddle Staples
    G09413901Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    • Release seat cover from the padding, starting from the outside. 
    • Do so in the following sequence: left/right, front/rear, middle. 
  4. Cut open cushion clips 00000 -b-  with side cutters -1-  and remove cover from padding -arrow-  .
    Fig 5: Removing Cover From Padding Using Tool
    G09413902Courtesy of PORSCHE CARS NORTH AMERICA, INC.