LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (42 - Rear Wheel Suspension, Drive Shafts) >> WM 429019 Removing And Installing Rear Anti-Roll Bar (PDCC) (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the rear silencer → Installing Exhaust System .
  2. Complete the following steps in sequence using the PIWIS System Tester by selecting PDCC >> System replacement >> Replace anti-roll bars <<: → WM 4303AW SAFETY REQUIREMENTS FOR PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
    1. 2.1. Set valve timing
    2. 2.2. Bleed the system → WM 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
    3. 2.3. Carry out a system test.
scientia non olet · About LEMON Manuals