LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (97 - Cables) >> WM 975219 Removing And Installing Wire Harness For Engine (Cayenne Tip, Cayenne Man) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before the engine wire harness can be removed, the battery must be disconnected and the terminal covered. → WM 9000IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (ALL MODELS)
  2. Remove engine guard. → Removing engine guard
  3. Remove cowl panel cover → Removing cowl panel cover .
  4. Remove DFI intake-air distributor. → Removing Intake-Air Distributor
scientia non olet · About LEMON Manuals