LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (24 - Fuel System - Electronic Ignition) >> WM 247319 Removing And Installing Oxygen Sensor Behind Catalytic Converter On DFI Engines >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Heavy components
  • Risk of squashing

→ Wear personal protective gear.

→ Get someone to help if necessary.

CAUTION: Hot components
  • Risk of burns

→ Let hot components cool down.

→ Wear personal protective gear.

  1. Move bonnet to service position using lid prop 9704. 
  2. Put on the protection covers.
  3. Remove right engine compartment cover → Removing front trim (engine compartment) .