Removing Front Trim (Engine Compartment)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Trim (Engine Compartment)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove trim panel on the right.
1. 1.1. Open lid of washer fluid container.
2. 1.2. Unscrew fastening screw -5- at filler neck of washer-fluid reservoir.
3. 1.3. Turn fixing clips -2- by 90° and remove them.
4. 1.4. Remove trim panel -6- on the right.
  
  Fig 2: Removing Trim Panel On Right
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove trim panel on the left.
1. 2.1. Turn fixing clips -2- by 90° and remove them.
2. 2.2. Remove trim panel -4- on the left.
  
  Fig 3: Removing Trim Panel On Left
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove trim panel at rear.
1. 3.1. Turn fixing clips -2- by 90° and remove them.
2. 3.2. Remove trim panel -3- at the rear.
  
  Fig 4: Removing Trim Panel At Rear
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove front trim panel on right and left.
1. 4.1. Turn fixing clips -2- by 90° and remove them.
2. 4.2. Remove front trim panel -1a, 1b- .
  
  Fig 5: Removing Front Trim Panel On Right And Left
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.