LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (24 - Fuel System - Electronic Ignition) >> WM 246919 Removing And Installing Oxygen Sensors Ahead Of Catalytic Converter On DFI Engines >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the bonnet. Move bonnet to service position using bonnet stay 9704. 
  2. Put on the protection covers.
  3. Remove engine compartment trim panels on the right. → Removing front trim (engine compartment)
scientia non olet · About LEMON Manuals