LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (24 - Fuel System - Electronic Ignition) >> WM 240919 Removing And Installing High-Pressure Sensor (Rail Pressure Sensor) On DFI Engines >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert fuses on both fuel pumps into the central electrical system's slots or connect the battery.
  2. Fit engine compartment covers at the plenum panel in the middle. For details, see → Installing front trim (engine compartment)
scientia non olet · About LEMON Manuals