LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (69 Occupant Protection/Personal Protection) >> WM 691219 Removing And Installing Rear Three-Point Belt (All Models) >> Removing Rear Three-Point Belt >> Removing Centre Rear Three-Point Belt

Removing Centre Rear Three-Point Belt

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Centre Rear Three-Point Belt
G09412791Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove backrest. → Removing Rear Backrest
  2. Remove headrest. → Removing Headrest
  3. Remove padding for rear backrest. → Removing Padding For 1/3-Split Folding Rear Backrest
  4. Unscrew fastening screw -5-  and remove the belt reel downwards.
    Fig 2: Removing Belt Reel Fastening Screw (Downwards)
    G09412792Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Turn seat-belt buckle -arrow A-  and push it into the belt guide -arrow B-  .
    Fig 3: Turning Seat-Belt Buckle
    G09412793Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Remove three-point belt in a downward direction -arrow C-  .
    Fig 4: Removing Three-Point Belt In Downward Direction
    G09412794Courtesy of PORSCHE CARS NORTH AMERICA, INC.