LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (13 - Engine - CRANKGEAR, Pistons) >> WM 137819 Removing And Installing Drive Belt On V6 DFI Engines (Cayenne Tip, Cayenne Man) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit intake manifold between the air cleaner and throttle housing. For details, see → Installing Air Box For Throttle Housing (Intake Pipe Upstream Of Throttle Valve)
  2. Fit front engine compartment cover. For details, see → Installing front trim (engine compartment)
scientia non olet · About LEMON Manuals