LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (13 - Engine - CRANKGEAR, Pistons) >> WM 135919 Removing And Installing Sealing Ring For Crankshaft Flywheel On V6 DFI Engines (Cayenne Tip, Cayenne Man) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transmission.
    1. 1.1. For vehicles with manual transmission, see: → Removing Transmission
    2. 1.1.1. Remove flywheel. → Removing Flywheel (Dual-Mass Flywheel) 
    3. 1.2. For vehicles with automatic transmission, see: → Removing Transmission
    4. 1.2.1. Remove drive plate for torque converter. → Removing Drive Plate For Torque Converter On DFI Engines 
      Fig 1: Tightening Torque Converter Drive Plate Bolts
      G09409030Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals