Subsequent Work
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Fit wheel → Removing and installing wheel .
- Tighten axle nuts → WM 4300TW TIGHTENING TORQUES . Operate the brake whilst doing so (second fitter required).
- Fit the relevant engine compartment side cover → Removing front trim (engine compartment) .
- Fit cowl panel → Removing cowl panel cover .
- To fill the level adjustment system, use the Porsche System Tester. To do this, select the Fill level adjustment menu item in the Level adjustment system. Switch on level adjustment → WM 4000V0 Lifting the vehicle .