Installing Cowl Panel Cover

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cowl Panel Cover

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Positioning cowl panel cover
1. 1.1. Insert cowl panel cover -3- in the radiator tank and align.
  
  Fig 2: Inserting Cowl Panel Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engaging cowl panel cover
1. 2.1. Engage cowl panel cover lug -3- in the retaining strip on the windscreen -5- -arrow- .
  
  Fig 3: Engaging Cowl Panel Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engaging fastening clips
1. 3.1. Position fastening clips -4- as shown in the drawing and press into the support.
  
  Fig 4: Positioning Fastening Clips
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 5: [Identifying Cowl Panel Cover Mark]
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Installing wiper arms
1. 4.1. Install wiper arms -2- → Installing Wiper Arms .
  
  Fig 6: Installing Wiper Arms
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Installing side cover
1. 5.1. Clip side cover -1- onto A-post.
  
  Fig 7: Installing Side Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Closing bonnet