LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (46 - Brakes - Brake Mechanics) >> WM 465819 Removing And Installing Front Brake Cable For Foot-Operated Parking Brake (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit centre console → Installing Centre Console .
  2. Install lower A-pillar trim panel → Installing A-pillar trim and fit the trim panel in the sill area → Installing Inner Door Sill Trim .
  3. Remove → see Fig 1 auxiliary pin from the actuator of the foot-operated parking brake and install cover on actuating module.
    Fig 1: Installing Cover On Actuating Module
    G09419641Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Install driver's seat → Installing Front Seat .
  5. Carry out a function test on the foot-operated parking brake.