LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (42 Rear Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 420119 Removing And Installing Rear Axle (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit rear wheels. → 440519 REMOVING AND INSTALLING WHEEL
  2. Install exhaust system. → Installing Exhaust System
  3. Bleed the PDCC system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
  4. Perform suspension alignment. → 449503 SUSPENSION ALIGNMENT, COMPLETE
  5. Calibrate the steering-angle sensor. → 456005 INITIALIZING AND CALIBRATING STEERING-ANGLE SENSOR
scientia non olet · About LEMON Manuals