LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (63 - Bumpers -- 92A Cayenne) >> WM 635519 Removing And Installing Rear Apron (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place rear apron in storage system VAS 6760 WE 1473  .

    Information 

    Only for vehicles with I-no. 6GB "Wider wheel covers, offroad"

  2. Install wheel covers on the rear apron. → Installing Rear Wheel Cover
  3. Secure rear wheel cover. → 664519 REMOVING AND INSTALLING REAR WHEEL COVER
  4. Install tail lights. → 943119 REMOVING AND INSTALLING TAIL LIGHT
  5. The control unit must be calibrated on vehicles with Lane Change Assist. 

    → 917025 PROGRAMMING CONTROL UNIT FOR LANE CHANGE ASSIST