LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (15 - Engine - Cylinder Head, Valve Control -- 92A Cayenne) >> WM 153319 Removing And Installing Chain Housing Cover (Cayenne) >> Subsequent Work >> Subsequent Work For Upper Chain Housing Cover

Subsequent Work For Upper Chain Housing Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install add-on parts for upper chain housing cover.
    1. 1.1. Install additional coolant pump with holder. → 194519 Removing and installing additional coolant pump
    2. 1.2. Install vacuum pump. → 477619 Removing and installing vacuum pump 3.6
    3. 1.3. Install tank vent valve. → 202319 Removing and installing tank vent valve
    4. 1.4. Install connector for camshaft hall senders. → Installing hall sender
    5. 1.5. Plug in connectors for hydraulic valves for camshaft controllers.
    6. 1.6. Install engine cable carrier and use new tie-wraps if necessary.
  2. Install cylinder head cover. → Removing And Installing Cylinder Head Cover 
  3. Install bar ignition modules. → Removing And Installing Bar Ignition Modules
  4. Install intake-air distributor. → Removing And Installing Intake-Air Distributor
scientia non olet · About LEMON Manuals