Installing Hall Sender
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Check sealing ring on hall sender and replace complete hall sender if sealing ring is defective.
- Make sure not to confuse the connectors for the intake and outlet camshafts.
- Move hall sender into installation position and insert it into the upper timing chain case. Screw in fastening screws hand-tight. Tightening fastening screws. → Tightening torque: 10 Nm (7.5 ft lbs.)
- Plug in cable plugs on camshaft hall senders.