Subsequent Work
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Fix camshaft in place
- To loosen the fastening screws on the camshaft controller, counter the relevant camshaft with an open-ended wrench (a/f 27) .
- To prevent damage, remove the camshaft guide .
- Install the cylinder head cover. → INSTALLING CYLINDER HEAD COVER - section on "Installing"
- Install intake-air distributor. → INSTALLING INTAKE-AIR DISTRIBUTOR - section on "Installing"
- Install transmission.
- 3.1. For vehicles with manual transmission, see: → INSTALLING TRANSMISSION
- section on "Installing"
- 3.1.1. Install flywheel.
- 3.2. For vehicles with automatic transmission, see: → INSTALLING AUTOMATIC TRANSMISSION
- section on "Installing"
- 3.2.1. Remove drive plate for torque converter. → INSTALLING DRIVE PLATE FOR TORQUE CONVERTER - section on "Installing"
- 3.1. For vehicles with manual transmission, see: → INSTALLING TRANSMISSION
- section on "Installing"
- Install engine.
- Install all engine compartment covers. → INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - section on "Installing"