LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 400619 Removing And Installing Front-Axle Carrier (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work >> Subsequent Work For Removing And Installing Front-Axle Carrier

Subsequent Work For Removing And Installing Front-Axle Carrier

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. On vehicles with 19-inch brake system:

    Fit the air guide. → Installing Front Anti-Roll Bar (PDCC) 

  2. Fit engine guard. → 108019 REMOVING AND INSTALLING ENGINE GUARD
  3. Fit the front wheels. → 440519 REMOVING AND INSTALLING WHEEL
  4. Remove engine support at the body. → 1001IN SUPPORTING THE ENGINE ON THE BODY
  5. Bleed the power steering. → 4890IN TEST AND ASSEMBLY WORK ON POWER STEERING
  6. Bleed the PDCC system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
  7. Perform suspension alignment. → 449503 SUSPENSION ALIGNMENT, COMPLETE
scientia non olet · About LEMON Manuals