LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (24 - Fuel System - Electronic Ignition -- 92A Cayenne) >> WM 246919 Removing And Installing Oxygen Sensor (Cayenne) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the bonnet. Move bonnet to service position using Bonnet Stay 9704  .
  2. Put on the protection covers.
  3. Remove engine compartment trim panels on the right. → REMOVING FRONT TRIM PANEL (ENGINE COMPARTMENT) - section on "Removing"