LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (19 - Engine - Cooling -- 92A Cayenne) >> WM 195519 Removing And Installing Coolant Regulator Housing (V8) (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake-air distributor → REMOVING INTAKE-AIR DISTRIBUTOR - section on "Removing".
  2. Remove fuel distributor pipe → REMOVING FUEL DISTRIBUTOR PIPE (FUEL RAIL) - section on "Removing".
  3. Remove water pump → REMOVING COOLANT PUMP  - section on "Removing".
  4. Remove thermostat insert. → REMOVING COOLANT REGULATOR  - section on "Removing".