LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (46 Brakes - Brake Mechanism -- 92A Cayenne) >> WM 468519 Removing And Installing Spreader Device >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel. → REMOVING WHEEL - section on "Removing"
  2. Move electric parking brake (EPB) into >>installation position<< using the Porsche System Tester. To do this, select >>Parking brake<< in the control unit overview. Select >>Drive links/checks<< >>All<< >>Move to installation position<<.
  3. Remove brake calliper and hang it at a suitable place in the wheel arch. → REMOVING REAR BRAKE CALLIPER - section on "Removing"
  4. Remove brake disc. → 465419 REMOVING AND INSTALLING REAR BRAKE DISC (PCCB)  - section on "Removing"
  5. Remove brake shoes. → 468356 REPLACING BRAKE SHOES  - section on "Removing"
scientia non olet · About LEMON Manuals