Subsequent Work For Cylinder Head 4-6

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Install camshafts.
→ Installing Camshafts .
Install cylinder head cover.
→ Installing Cylinder Head Cover .
Install vacuum pump.
→ Installing Vacuum Pump .
Install positive crankcase ventilation cover on the cylinder head.
1. Positive crankcase ventilation cover
2. O-ring, always replace
3. External Torx screw, M6
  
  Fig 1: Identifying Positive Crankcase Ventilation Cover (4-6)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit hydraulic return line for power steering on the oil/water heat exchanger and secure it in the holder.
Completely install intake-air distributor.
→ Installing Intake-Air Distributor For Cylinder Bank 1-3 and Installing Intake-Air Distributor For Cylinder Bank 4-6 .
Install the engine.
→ Installing Engine .