Removing Cover For Front Backrest
Information
The locking lugs can break off when removing the collar. Replace the collar during installation. The release lever can be reused.
- Slide clothes hook -1- up and remove it -arrow- .
- Slide cover for backrest -1- on the backrest shell -2- at the bottom left and right, starting at the middle (direction of arrow- ) and disengage it.
- Press cover piping -1- off the backrest frame -2- all the way around. To do this, carefully open the retaining clips using a plastic wedge -3- and pull out the cover piping.
- Remove side airbag. → REMOVING FRONT SIDE AIRBAG .
- Slightly loosen connection for backrest cover -1- from frame for side airbag -2- using a plastic wedge -3- and pull it out by hand out the way around.
- Loosen cover for backrest from frame for control button for backrest release on both sides -arrows- and pull it out.
- Press out cover for backrest -1- at the cushion carrier -2- at the bottom left and right using a plastic wedge -3- (-arrow A- ).
- Pull cover for backrest -1- out of the rear cushion carrier -2- by hand all the way around -arrows B- . To do this, carefully lever out the piping at the bottom connection using a plastic wedge.
- Remove cover for backrest -1- .