Accessories sensors, sending units, switches and ancillaries
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - SENSORS, SENDOR & SWITCHES, ENGINE M96/01 (1 OF 2)
| Location | Thread | Tightening torque Nm (ftlb.) |
|---|---|---|
| Oil-level sender to crankcase | M14 x 1.25 | max. 20 (15) |
| Oxygen sensor to catalytic converter | M18 | 55 +/- 5 (41 +/- 3.5) |
TIGHTENING TORQUES - SENSORS, SENDOR & SWITCHES, ENGINE M96/01 (2 OF 2)
| Location | Thread | Tightening torque Nm (ftlb.) |
|---|---|---|
| Knock sensor | M8 | 20 +/- 2 (15 +/- 1.5) |
| Hall sender | M6 (micro-encaps.) | 10 +/- 0.5 (7.5 +/- 0.5) |
| Speed sender | M6 (micro-encaps.) | 10 +/- 0.5 (7.5 +/- 0.5) |
| NTC- coolant temperature | M14 x 1.5 | 25 +/- 5 (19 +/- 3.5) |
| Oil-pressure switch | M14 x 1.5 | 25 +/- 5 (19 +/- 3.5) |
| Starter | M10 | 45 (33) |
| Generator | M10 | 45 (33) |
| Ignition coil to cylinder head cover | M6 | 10 (7.5) |
| Power steering pump (hydraulic pump) to bracket | M8 | 23 (17) |
| Pressure pipe to power steering pump | M16 | 24 (18) |
| Oil reservoir to power steering pump | M8 | 23 (17) |
| Check valve for auxiliary air pump | M22 x 1.5 | 32 (24) |
| Coolant pump to crankcase | M6 | 10 (7.5) |