LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine - 911 CARRERA (996)) >> Removing and installing closure cap for camshaft bore >> Installing and removing closure caps at cylinder head 4 - 6 - pulley side >> Removal

Installing and removing closure caps at cylinder head 4 - 6 - pulley side: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn shop-made extractor into center of piercing point of closure cap and pull off the cap. Remove the upper closure cap; to do so, first undo the tailpipe fastening clamp and twist the tailpipe downward. Pull off the closure cap.
scientia non olet · About LEMON Manuals