Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - BEARING COVER
| Location | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|
| Oil drain plug, hexagon socket a/f 8 | M18 x 1.5 | 50 Nm (37 ftlb.) |
| Pan-head screw for clutch pressure plate | M8 | 25 |
| Torx socket screw for DMF | M10 x 50 x 1 | 25 (19) + 120° torque angle |
| Torx socket screw for torque converter drive plate | M10 x 25 x 1 | 25 (19) + 120° torque angle |
| Hexagon-head bolt for coolant pipe, cylinder bank 4 - 6 | M6 x 12 | 10 |
| Chain tensioner | M27 x 2 | 80 |
| Hexagon collar nut, bearing cover intermediate shaft | M8 x 1 | 12 + 1 |
| Hexagon-head bolt, micro-encapsulated, bearing cover intermediate shaft to crankcase | M6 x 20 | 10 |