LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine - 911 CARRERA (996)) >> Disassembling and assembling inlet camshaft >> Assembling inlet camshaft >> Bearing sleeve identification

Bearing sleeve identification

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Camshaft Bearing Sleeve
G03100241Courtesy of PORSCHE OF NORTH AMERICA, INC.
  1. Install the bearing sleeve: lightly oil running surface with engine oil. Press together the first piston ring and carefully push up the bearing sleeve. Proceed in the same way with the second piston ring.
    NOTE: Make sure that the washer is inserted.
  2. Position the washer and place the camshaft adjustment device in position. Insert the central screw with the adapter and tighten gently by hand.
scientia non olet · About LEMON Manuals