Overview of working positions

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The topic Disassembling and assembling engine includes the following items:

Item 1 Removing and installing intake distributor
Item 2 Removing and installing drive belt
Item 3 Removing and installing deflection rollers and tensioning roller for drive belt
Item 4 Removing and installing oil pump with coolant guide housing
Item 5 Removing and installing oil pan with partition box, air/oil separator and oil suction pump
Item 6 Removing and installing camshafts
Item 7 Disassembling and assembling cylinder head
Item 8 Disassembling and assembling crankcase
Item 9 Removing and installing pistons
Item 10 Removing and installing intermediate shaft on bearing housing
Item 11 Disassembling and assembling bearing housing with crankshaft