LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine - 911 CARRERA (996)) >> Disassembling and assembling cylinder head - Camshaft drive >> Camshaft assembly instructions >> Preassemble camshafts

Preassemble camshafts

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The inlet camshaft, exhaust camshaft, chain tensioner and chain must be preassembled before installation in the cylinder head.

scientia non olet · About LEMON Manuals