Adjusting timing of cylinder bank 4 - 6 - Engine installed: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Clean receiving bore; remove any silicone material emerging. Manually fit new cap dry and press in as far as it will go.

Fig 1: Identifying Receiving Bore Caps
Courtesy of PORSCHE OF NORTH AMERICA, INC.