Installing sun blind
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SUN BLIND INSTALLATION PROCEDURE - TARGA
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Tensioning sun blind to roll up | Tension sun blind to roll up -4- . Tension tensioning axle -4- . See Fig 1 . |
| 2 | Pressing in and fixing tensioning axles | Hold the square with a pair of combination pliers and press in the tensioning axle -4-direction of arrow-3- . See Fig 1 . |
| 3 | Install sun blind | Insert tensioning axle -4-6a-6b-direction of arrow- . See Fig 1 . |
| 4 | Installing guide strut | Position the sun blind above the holding strut. Insert guide strut -1-2-inset C- . See Fig 1 . |
| 5 | Engaging sun blind into bracket | Insert sun blind into the bracket -7-direction of arrow- . See Fig 1 . |
| Installing support bow | ||
| Installing electric motor for sun blind | See INSTALLING ELECTRIC MOTOR FOR SUN BLIND . |